Physical & Power

Body Material: Plastic
Camera: 2M pixels, automatic lighting
Button: 1 call button with backlight
Wiegand port: Support
RF card reader: 13.56MHz
Light sensor: 1
Relays out: 1
Inputs: 2
Micro SD card slot: 1
Microphone: -36dB
Speaker: 8Ω / 1.5W
Ethernet port: RJ45, 10/100Mbps adaptive
BLE: Yes
WiFi: IEEE802.11b/g/n, 2.4GHz (E12W Only）
Vandal alarm: Yes
802.3af Power-over-Ethernet
12V DC connector (if not using PoE)
Power: 12V / 1A
Water-proof & Dust-proof: IP65
Installation: Wall-mounted
Size: 146x70x23mm
Working Humidity: 10~90%
Working Temperature: -40°C ~ +60°C
Storage Temperature: -40°C ~ +70°C

Audio

SIP v1 (RFC2543), SIP v2 (RFC3261)
Narrowband audio codec: G.711a, G.711μ, G.729
Broadband audio codec: G.722
DTMF: In-band, out-of-band DTMF (RFC2833), SIP Info
Echo Cancellation
Voice Activation Detection
Comfort Noise Generator

Video

Sensor: 1/2.7”, CMOS
Pixels: CIF, QCIF, VGA, 4CIF, 720p, 1080p
Video codec: H.264, H.265
Video resolution: up to 1920x1080p
Max. image transfer rate: 1080p – 25fps
Viewing angle: 123°(H) / 69°(V)
White LEDs for picture lighting during dark hours with internal light sensor

Door Entry Feature

Relays controlled individually by DTMF tones
Camera permanently operational
Auto-night mode with LED illumination
White balance: auto
Minimum illumination: 0.1LUX

Networking & Protocol

Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP

Deployment & Maintenance

Auto-Provisioning
Web management portal
Configuration backup / restore
Entry log export
Access table export / import
Firmware upgrade
System logs (include door access logs)

Application Scenario

Apartment/flat intercom with door access control
Remote site entry over Internet